11/27/2023 0 Comments Gps4cam a7rHere you see an Aokatec device on the camera. This device “talks” to a separate GPS device which does not need to be thethered to the camera. Potentially a really good solution, this arrangement consists of a small, bluetooth device connected to the 10-pin socket of the camera. Overall the fixes were quite accurate but the complexity of managing start-up may make this a non-starter (no pun). I missed a new fix because I was able to move 100ft and take a picture before the led had turned back to blinking green. If a shot is taken while red, the last GPS fix is used. I noticed that after a shot, the unit can “lose” GPS (LED blinks red) for a few moments then goes to green. Complicated start-up procedure (see manual) that takes 3-4 minutes for a “cold” start and ~1min for a “hot” start. Slimmer profile to the Gi-GPS with less chance it will interfere with lenses. Set Location Data -> standby timer to OFF and see how much the battery drains.Īokatec AK-G1s GPS Receiver for Nikon D800E Wait until light is steady green before taking images. GPS acquisition can take a while (D810 - 1-2min). Potentially interferes with larger lenses and installing/removing lenses. Note (Sep 10, 2016): This works fine with the D810 and the D500. There are compact GOS devices which connect directly to the 10-pin connector. Link to latest version from Solmeta, for D800: You can see it’s a bit of a contraption! Also, on testing, this particular device seems to not work on the D800E. They can be also attached to the camera strap) and take up the 10-pin connector which is an issue if you want to use a remote trigger.Ībove is an example of the Solmeta GPS connected to the D800E. They are generally bulky, occupy the hot-shoe (although only for convenience. There are assorted devices which connect to the hot-shoe of DSLR’s, like the D800, and also connect to the 10-pin socket via a cable. I haven’t done a real test but it looks like it drains the battery big time. This is a handy little device which attaches to the (proprietary) hot shoe on the Nikon V1, V2. Separate GPS unit, attached to the camera. It seems to work fine except it takes around 5 minutes after power on to capture the GPS location.Ģ. The only camera I have which has GPS built in is the Nikon 1 AW-1. Remember where you were and manually geo-tag using software apps Bluetooth device, attached to the camera, which connects to an external GPS deviceĥ. Separate GPS unit, attached to the cameraģ. This section explores the options available for geo-tagging pictures. Novoflex Lens Adapter on Canon 5D MkIII.Nissin Di700A Flash & Air 1 Commander (SONY, Nikon, Fujifilm).Extending Image quality through Multi-Image Alignment.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |